Monopolar mode – Monopolar cutting
Monopolar cutting mode includes pure cut, blend 1, blend 2, blend 3. The output power can be adjustable.
Pure cut: cut the tissue cleanly and accurately without coagulation.
blend 1: Use when the cutting speed is slightly slow and a small amount of hemostasis is required.
blend 2: Compared with blend 1, it is used when the cutting speed is slightly slower and the better hemostatic effect is needed.

Monopolar modes – Monopolar coagulation
Monopolar coagulation mode includes spray coagulation, forced coagulation, and the output power is adjustable.
Forced coagulation: It’s non-contact coagulation. The output threshold voltage is lower than spray coagulation.
It’s suitable for coagulation in a small area.
Pray coagulation: high-efficiency coagulation without contact surface. The coagulation depth is shallow.
The tissue is removed by evaporation. It usually use a Blade or ball electrode for coagulation.

Bipolar mode
The bipolar mode includes only standard mode. The output power is adjustable.
Standard mode: It’s suitable for most bipolar applications. Keep the low voltage to prevent sparks.

Each V1-100V Unit comes with a starter kit including:
1x Foot Switch
1x Disposable Handswitch Pencil
1x Patient Matt with cable (reusable)
1x Reusable bipolar forceps with cable
1x Power Cord
1x Instruction Manual
2 x Spare Fuse

ACCESSORIES
Electro Surgical S Pencil
Disposible Electro Surgical Pencil
Pencil handpiece for microsurgical needles
Electro Surgical Micro Needles
Electro Surgical Electrodes
Ball Electrode
Surgical Electrode
Blade Electrode
Curved Bipolar Forcep
Bipolar Forcep Straight
Water proof foot switch
Stainless Electro Surgical Earth Plate